Fog Tee Sew Along
1 — Cutting, Interfacing and Pre-Pressing
21—January 2021
In this step we cover how to transfer the pattern markings if you are making a shorter length sleeve, where to place the optional interfacing on the Boatneck View and pre-pressing.
If you are sewing a short or three-quarter sleeve length Fog Tee you may need to transfer the turnback markings for your size. We are showing you the process for the short sleeve length, but the process is the same for the three-quarter length sleeve.
Start by tracing the sleeve head and arm to the cut length indication line for the sleeve length you want to make. Then mark the cut length line, extending it about 2cm at each end.
Slide your pattern tracing across to the smallest size where the notch and turnback reference notation is. Match the sleeve and hem lines, then trace the notch and turn back to your pattern. Now repeat for the other side.
Your pattern piece is now ready for cutting!
Once you have cut out all your pattern pieces you will apply the interfacing (if you choose to) and pre-press your pieces.
If you are sewing the Boatneck view you may wish to apply a strip of lightweight fusible interfacing at the shoulders, this can help provide stability for lighter weight knits. The interfacing strips should be 2cm wide. To get the length, measure the distance from the shoulder edge to the + on the pattern, then add 1cm. You will need four of these strips in total, one for each shoulder on both the front and back pieces.
Once you have applied the interfacing, mark the + point at the end of each shoulder seam, as indicated on the pattern.
If you are sewing the Boatneck view, press the 4cm neck facing to the wrong side. This fold line will run through the + that indicates the end of the shoulder seam. Do this for both the front and back pieces.
If you are sewing the crewneck version, fold the neckband in half lengthwise with right sides together and press.
Now we will fold back and press the 2cm hem to the wrong side on the front and back pieces. This step applies to both the Boatneck and Crewneck views.
Fold back and press the 2cm sleeve hem to the wrong side. This will look slightly different depending on whether you are sewing the short sleeve, 3/4 sleeve or, long-sleeve version.
Now move on to Step 2 to start sewing!
Check out the Fog Tee pattern in our Online Store here. Don't forget you can always email us via patterns@thefabricstore.co.nz if you need advice!
Fog makes from our wonderful community are also popping up over on Instagram, follow @makebytfs and use #TFSFogTee so others can check out your creations!
