2 — Sew Front + Pockets

Paint Dress + Top Sew Along — 2 — Sew Front + Pockets
Nov 1 2022

With the right sides of your fabric together, pin the left side front panel to the left side of the centre front piece, matching the notches. Sew them together and then neaten the seam. Press the seam towards the side panel.

Repeat for the other side.

If you are sewing the dress and would like to add pockets, continue here, otherwise move on to the next blog post.


Place one pocket bag onto the front with the right sides together and pin together at notches marked ‘pocket opening’.

Stitch a box with your sewing machine, from notch to notch, from the outside edge in, towards the pocket bag 1cm. With your needle down, turn 90 degrees and continue stitching at 1cm, parallel to the edge. Stitch down to line up with the lower notch, turn back towards the outside, and stitch towards the edge. You will have created a stitched box along the pocket opening.

Next, you need to mitre into the upper and lower corners of the box. Do this by snipping into each corner at a 45-degree angle. Use very sharp scissors and take care not to cut into your stitch line!

Fold the pocket bag out and press along the edge of the pocket opening. Under stitch the pocket opening from corner to corner.

Press the pocket bag to the wrong side, ensuring that the seam allowance either side of the opening is fully turned out.

Lay the other pocket piece on top, right sides together and matching the notches. Pin it in place then sew the pocket bags together around the long, curved edge, then neaten.
Baste the pocket bag to the front either side of the pocket opening.

In the next post, we construct the back and attach the sleeves!

Check out the Paint Dress + Top pattern in our Online Store here.

Don't forget you can always email us via patterns@thefabricstore.co.nz if you need advice!

Paint makes from our wonderful community are also popping up over on Instagram, follow @makebytfs and use #TFSPaint so others can check out your creations!

© the Fabric Store
Location — Australia